Full Metal Bicycle Bike Cycling Disc Brake Pads for SHIMANO SRAM AVID HAYES Magura Formula Hope
4 Pairs per Order, 4 pairs = 8 pcs pads with springs if it need or have springs.
1 Pairs pads for 1 caliper, 4 pairs for 4 calipers, except Magura MT5 and MT7, it need 2 pairs pads for one caliper
Gold Color, Full Metal Pads, Sport Ultra Class
What's the difference between metallic and organic brake pads
There are two main types of material that brake pads are made out of. There are organic pads (sometimes called resin) as well as metallic pads which have specks of metal embedded into their surface.
Resin pads will make less noise and have a sharper initial bite. However, they may fade toward the bottom of long descents, and they have poor performance in the rain.
Metallic pads on the other hand will work better in the rain and offer a more consistent performance on long descents. They are louder, but the noise doesn't necessarily mean anything is going wrong.
It's mostly up to personal preference as to what material you buy. Gravity riders who speed down long descents might prefer metallic pads. Riders who like a sharp bite right when they pull the lever should go for resin material.
Lastly, it is important to consider the rotors you have fitted to your bike. The best mountain bike disc brake rotors will accept both types of pads however some cheaper rotors can only be used with organic pads.
How to bed-in disc brakes?
Every disc brake and pad manufacturer has its own bed-in procedure, but all are slight variations on a similar set of steps. The key is to heat and cool the brakes in a repeatable and consistent manner, without accidentally scoring the pads or rotor by braking too hard, too soon. Again, the goal is a consistent transfer layer. Here’s what we have found works:
Hop on your bike somewhere with plenty of room. Pedal up to a moderate speed – 15km/h or so.
Sit down in the saddle and apply the brakes evenly, without skidding, until speed drops to a walking pace.
Release the brakes while you’re still moving.
Repeat 10 times. You will feel brake power increasing with each repetition. Be careful not to skid as brake power increases with each repeat.
Perform the same set of steps, but increase speed to 25km/h.
Repeat 5-6 times.
BP001G-Elixir
Fit: AVID SRAM ELIXIR 1 3 5 7 9 (2011-2016) X0/DB 1 3 5 /LEVEL TL/LEVEL T/LEVEL/LEVEL ULT/TLM B1 (2020+)
BP002G-BB7
Fit: AVID BB7, Juicy 3 5 7 Ultimate
BP003G-BB5
Fit: AVID BB5, Giant ATX 770D, Promax DSK-710
BP004G-M446
Fit:
MT200, MT500, Deore M515, M515-LA, M515-LA-M, M525, Nexave C501, C601, Non-Series M375, M395, M415, M416, M446, M465, M475, M485, M486
To Replace Shimano B01S Pads
BP005G-M596
Fit:
M965, M966, M975, Saint M800, Deore XT M765, M775, M776, SLX M665, Deore LX M585, T665, Hone M601, Deore M535, M595, M596, Alfine S500, S501, Non-Series M545, R505, T605
BP006G-M785
Fit:
M9000, M9020, M987, M985, M8100, M8000, M785, M7100, M7000, M675, M666, M6100, M6000, M615, S700, RS785, R785
To Replace SHIMANO G04Ti, G04S, G03A, G03S, J04C, J03A
BP008G-GX-C
Fit: Hayes MX2 MX3 MX4 SOLE, GX-C
BP009G-Gold
Fit: ORO K18 ORO K24 ORO PURO
BP010G-R1
Fit: Formula R1R, R1, RO, RX, T1, Mega
BP011G-SL
Fit: Magura Marta 2002-2008 & Marta SL
BP012G-MT2
Fit: Magura MT2, MT4, MT6, MT8, MTS
BP014G-IOX
Fit: Lyra, Novela IOX
To Replace L10.11 Pads
BP015G-ZOOM
Fit: ZOOM DB 280 DB 550 DB450 DB350 ONE
